All {[ category ]}
All {[ device.name ]}
{[ sort['name'] ]}
view_list
   Search

BandShift

playlist_add Wishlist

iTunes Description:

BandShift is a multi-band auditory filter and frequency shifter taking a new approach to manipulate the pitch of complex sound sources in realtime. The well know analog Bode frequency shifter shifts all frequencies in an input up by the same amount and thereby alters their harmonic relation and tends to produce inharmonic results. But it's perfect in dealing with transients and sounds smooth even with high amounts of down pitching.

BandShift splits the spectrum in 27 bands and applies a different amount of frequency shifting to each band emulating a harmonic pitch shifting. This gives you perfect pitch shifting for all kind of drum sounds over a vast shifting range of +/- five octaves without disturbing the transients or introducing metallic distortions. The extreme range of shifting gives you access to a vast field of unknown sonic territory.

The possibility to apply different shiftings on each band gives you exciting possibilities: Suppose you have a drum loop which is perfect, but the bass drum is a bit too high or too low to fit in your mix then you can easily get the bass drum shifted a bit down and the rest of the spectrum remains unchanged. But it’s applications are not limited to drum sounds, they’re only limited by your imagination.

Features:

• Multi band bode frequency shifter
• Linear phase filter bank with 27 bands
• AudioUnit for AUv3 compatible hosts.
• Inter-app audio compatible effect.
• Audiobus 2 compatible with state saving.
• Apply effect to any song in your iTunes library.
• MIDI Learn for X/Y Pads
• Low latency live usage with mic and headphones.
• Audio recorder

DubFilter

playlist_add Wishlist

iTunes Description:

The Dub Filter is a dual low-pass/high-pass 24/48 dB filter, with resonance and the exclusive Overlap parameter!
It contains a completely redesigned stereo sample player with LFO and scrubbing capabilities.

Main Features:

- Audiobus and Inter-App Audio support (sender and FX)
- State Variable Filter (Low-Pass and High-Pass) with resonance and overlap
- Built In Stereo Sampler with varispeed and scrubbing
- Control Manager LFO for all the Parameters
- Midibus, Virtual Midi and Network: 14 bit NRPN controllers
- File Manager, sharing common audio files via iTunes, Dropbox and AudioCopy
- Snapshots Presets Morphing Pad
- Post Fx Chain: Low-shelf Filter, High-shelf and Compressor

Stereo Designer

playlist_add Wishlist

iTunes Description:

Stereo Designer is an easy to use multi-purpose stereo shaping tool for Audiobus and Inter-app Audio. Create unique wide stereo image, "stereoize" a mono sound source, apply mid/side processing, independent high and low pass filters per channel, and more.

Process synths, drum machines and hundreds of other apps by connecting through Audiobus. Use Stereo Designer as an effect inside DAW apps such as Garageband, Auria, Cubasis, and AudioShare using Audiobus or Inter-app audio.

Stereo Designer supports Core MIDI via the Camera Connection kit, USB MIDI interfaces, Virtual MIDI and WiFi connections. The MIDI Learn function lets you easily assign your MIDI controller's knobs and sliders to control Stereo Designer's effect parameters.

Here's what users are saying:

" With Stereo Designer, Christopher has created one of the most impressive/creative stereo enhancement processors I’ve ever had the pleasure to use. If there was a VST/AU version for the desktop then I’d buy it in a heartbeat…."
- Music App Blog (www.musicappblog.com) 

"Add depth to your sounds -
This can help add a missing dimension to your music. Try running a synth or drum app through it. Use an audio interface to process guitars, hardware synths, or even a signal from your desktop DAW. It works really well with the developer’s other apps too. Great with Audiobus."
- dmonterroso (AppStore review)


Stereo Designer features two distinct modes:
PERFORM and TWEAK.

● PERFORM mode is focused around four XY touch pads. Touch to control LOW PASS, DELAY, PAN and OUTPUT gain independently for left and right channels.

● TWEAK mode features large expressive sliders and additional effect parameters, allowing you to fine tune your sound.

In addition to Audiobus and Inter-app Audio support, Stereo Designer can also process external instruments such as guitar, voice and synths by connecting a microphone or professional audio interface such as the Apogee Jam, ONE, or any iOS compatible USB audio interface. Guitarists can use our effects live by connecting the output of their audio interface to an amp.

For more info and video demos visit: http://stereodesignerapp.com


Check out our entire FX series including Caramel, Crystalline, Echo Pad and Swoopster!


COMPATIBILITY:
● requires iOS 7.0 or later
● iPad Mini/iPad 2 or newer
● Audiobus 2 compatible (Effect, Input, state saving)
● Inter-App audio compatible (effect node)
● Compatible with DAW apps such as Auria, Cubasis, and Garageband
● compatible with USB audio interfaces
● Core MIDI compatible

FEATURES:

● Control individual Left/Right channel volume, panning, filter and more.
● Mid/Side (M/S) processing mode lets you adjust the volume, high and low pass filters for Mid and Side independently.
● Widen or reduce the stereo width of an input signal.
● Independent panning position of each channel, allowing for interesting stereo placement.
● Individual High and Low Pass filter per channel for additional stereo shaping.
● Phase (polarity) invert Left/Right channels.
● Isolate the Left or Right channel and manipulate the resulting mono signal.
● "Stereoize" mono inputs using individual channel delay + High and Low Pass filters.
● Sum Left and Right channels to mono.
● Audiobus 2 compatible with state saving
● Inter-app Audio compatible
● Core MIDI compatible, works with any MIDI controller via MIDI Learn
● Select presets via MIDI program change


Stereo Designer works with just about any professional iOS compatible USB audio interfaces. Here is a list of interfaces that have been tested and verified to be compatible:

● Apogee Jam
● Apogee Mic
● Apogee ONE for iPad/Mac
● Apogee DUET for iPad/Mac
● Apogee QUARTET for iPad/Mac
● iRig
● iRig HD
● iRig iMic
● Focusrite Scarlett series (*requires USB hub)
● Alesis io2
● Alesis IO Dock
● Behringer UCA202
● many more

Caramel

playlist_add Wishlist

iTunes Description:

Caramel is a stereo distortion, crusher and fattener effect designed for Audiobus and Inter-App Audio. Caramel is perfect for adding lo-fi grit and punch to drums, bass, synths, guitar and more.

In addition to Audiobus and Inter-App Audio, Caramel can process external hardware by connecting a professional USB audio interface such as the Apogee Jam or Apogee ONE, and many more compatible USB interfaces. You can also use the built in headset microphone. Guitarists can use our effects live by connecting the output of their audio interface to an amp.

Caramel supports Core MIDI via the Camera Connection kit, USB MIDI interfaces, Virtual MIDI and WiFi connections. The MIDI Learn function lets you easily assign your MIDI controller's knobs and sliders to control Caramel's effect parameters.

Caramel features two distinct modes:
Perform and Tweak.

● Perform mode is focused around four XY touch pads. Touch to control Crunch, Sizzle, Crush and Bite independently for left and right channels.

● Tweak mode features large expressive sliders and additional effect parameters, allowing you to fine tune your sound.


For more info and video demos visit: http://caramelfxapp.com


Check out our entire FX series including Crystalline, Echo Pad, Stereo Designer and Swoopster!


COMPATIBILITY:
● requires iOS 7.0 or later (Audiobus requires iOS 8.0+)
● iPad Mini/iPad 2 or newer
● Audiobus 2 compatible (Effect, state saving)
● Inter-App audio compatible (effect node)
● Compatible with DAW apps such as Auria, Cubasis, and Garageband
● compatible with USB audio interfaces
● Core MIDI compatible
● Receive MIDI over Bluetooth LE (requires iOS 8)
 
FEATURES:

● Control Left and Right channel Crunch, Crush, Girth, SIzzle independently for interesting stereo effects.
● Girth parameter adds subtle to punishing low end boost to drums and bass.
● Multiple stereo output modes including Normal Stereo, Wide Stereo, and Sum to Mono.
● Wide range of colorful lo-fi distortion tones are possible, from subtle grit and punch to absolute digital wreckage.
● Audiobus 2 compatible with state saving
● Inter-app Audio compatible
● Core MIDI compatible, works with any MIDI controller via MIDI Learn
● Select presets via MIDI program change

Caramel works with just about any professional iOS compatible USB audio interfaces. Here is a list of interfaces that have been tested and verified to be compatible:

● Apogee Jam
● Apogee Mic
● Apogee ONE for iPad/Mac
● Apogee DUET for iPad/Mac
● Apogee QUARTET for iPad/Mac
● iConnectMIDI2+
● iConnectMIDI4+
● iRig
● iRig HD
● iRig iMic
● Focusrite Scarlett series (*requires USB hub)
● Focusrite iTrack dock
● Alesis io2
● Alesis IO Dock
● Behringer UCA202
● many more

Svep

playlist_add Wishlist

iTunes Description:

Svep is a stereo modulation filter effect suitable for any sound. All parameters are easily editable in one screen and the clean and responsive user interface encourages creativity. Tweak it to produce anything from old-school phasers to subtle choruses.

Features:

- Works as a Audio Unit Extension (AUv3) with compliant hosts.

- Inter App Audio (IAA) compatible. Works fine with Garageband and other IAA compatible hosts.

- Supports Audiobus 2 including state saving.

- Load / Save presets

- Remembers IAA hosts (will automatically load last used settings when a host connects)

- Low cpu usage

- Simple but yet powerful user interface

Svep is developed by musicians for musicians.
« Prev Page | 1 2 3 4 5 ... 34 |Next Page »