All {[ category ]}
All {[ device.name ]}
{[ sort['name'] ]}
view_list
   Search

PhaseDelayArray

playlist_add Wishlist

App Store Description:

PhaseDelayArray is an Audio Unit, or AU, for iOS. This application is simply a container for the Audio Unit and also serves as the documentation for the AU. PhaseDelayArray must be used in some sort of Audio Unit host or DAW application.

PhaseDelayArray is a bit of a strange effect. O.K, so, what is it? PhaseDelayArray has three effect units chained together in an interesting configuration, and one of these units is just a little bit twisted. The first unit consists of a sequential array of vibrating (oscillating) reverberation sections. The oscillations can be tiny or huge. The reverb depth can be tiny or huge. The overall effect can be subtle or HUGE. It can create a wide range of sounds. The second section is a modulation unit. It takes the output of the PhaseDelays and whips it around, or up-and-down or back-and-forth. The final section is a feedback unit with the possibility of a lot of delay (up to 2 seconds). The mix section allows you to tap into all this strangeness in four different places. PhaseDelayArray can be used in mono-to-mono, mono-to-stereo, or stereo-to-stereo settings. Several of the features work best with a stereo output.

JAX !Make Louder (Audio Unit)

playlist_add Wishlist

App Store Description:

JAX Make Louder is an Audio Unit processor from our [ Just An Extension ] series with only one goal: make your sounds gained and saturated in loudness and ensure valid levels.

Everyone knows the common problem: Sometimes audio just cannot be loud enough, sometimes it distorts on the output badly. 

So we have developed an effect, that will control this. 

Make Louder is not based on complex dynamics processors and it is also not an overdrive or amplification or saturation effect. We created a special digital algorithm that can boost audio in loudness up to a certain limit, without colorizing the sound too much. And it can prevent the audio to exceed the output limits if you for instance stack together many sound sources.

JAX Make Louder also has an inbuilt intelligent algorithm, preventing bogus loudness boosting if a certain maximum level is already reached.

...

There is a complete manual inside the app package and on our product website.

iFX Rack

playlist_add Wishlist

App Store Description:

iFX Rack is an analog modeled virtual effects rack for your iOS Device. In partnership with Overloud™, we have licensed the, ever so popular VKFX™ effects suite, which is included in the initial purchase. The VKFX suite is a meticulously modeled vintage analog effect processor, which aims to recreate classic vintage hardware using actual analog circuit modeling. It has been the most beloved effects suite ever created for the desktop and our iFX Rack is providing the same exact effects to you along with a recreation of the original factory presets.

NEW UPDATED FEATURES:

▪ BlueTooth MiDI Capable
▪ iCloud Backup and Sharing of Presets
▪ Enhanced AUv3 Preset Resizing
▪ Expansion Pack Banners and Branding
▪ Metal support, Faster UI, Faster loading, and major CPU Updates
▪ Two Mode MIDI Program Change

Here is what is included in the initial purchase:

1. Preamp with Two band EQ
2. Stereo Auto-Pan
3. Analog Chorus
4. Tube Amplifier with Three Band EQ
5. Spring Reverb
6. Envelope and Dynamic Filter Wah
7. Opto-Compressor
8. Phase Shifter
9. Overdrive
10. Multi-Tap Tape Delay with Multiple Modes


Highlights

• IAA
• AUv3
• 93 Factory Presets from VKFX Library Ported Over
• MIDI Learnable Automation
• Modulation FX Syncable
• Dynamically Drag-able FX Chain Slot Assignment
• Highly CPU Efficient coding
• Flexible Preset Management with Favorite Options

IAPs

▪ Master Limiter with Soft Clipping and Tube Saturation
▪ 11-Band EQ
▪ SUB Harm - Sub frequency modulator/enhancer
▪ AMP Combo and Speaker Simulation
▪ Degrade - Sample Quality Bit Reduction
▪ Detune - Pitch Shifter Thickener
▪ Rotar - Rotary Speaker/Leslie simulation with physical modeled parameters
▪ DimenD - Dimension D Chorus emulation
▪ DISTORTIT - Nasty Distortion unit
▪ Stereo Widener Chorus - Turns any mono sound into a stereo with slight warm chorusing
▪ ST Widener Enhancer - Enhance stereo signals with Safe Bass frequency option to keep mono and two spread modes
▪ Amp Sim - A convolution IR with popular AMP Simulations
▪ FVerb - Schroeder Algorithmic Reverb
▪ MVerb - Dattorro's figure-of-eight Algorithmic Reverb
▪ Spring Reverb - Rare and vintage spring reverbs
▪ Flanger - Warm Flanger effect
▪ FantasyVerb - A convolution reverb containing iconic spaces and analog reverbs such as:

i. LEX200
ii. LEX480X
iii. RLND RE201
iv. RLND DEP3 Echo
v. EMT 244
vi. NBA Lush
vii. ASR-10/DP4
viii. Exotic Places
ix. Special FX

---------
Terms and Privacy Notices:

• EULA Terms of use - https://gospelmusicians.com/EULA.html
• Privacy Policy - https://gospelmusicians.com/privacy-policy.html
• Terms and Conditions - https://gospelmusicians.com/terms-conditions.html

Haaze 2

playlist_add Wishlist

App Store Description:

Haaze is a 16 band stereo widening tool that utilizes three different methods of controlling the stereo width and spatial positioning of an audio stream.

• Haas - adds a small delay to the left or right audio channel which will make the listener believe the sounds arrives from the side that’s reaching the ear first.

• Pan - Alters the gain level on one of the audio channels. All 16 bands can be panned separately, so this method gets quite equal to the common “split eq” function in various equalizers.

• MS Stereo. Controls the output stereo width on each band, from normal stereo signal to mono.

There’s also a view for controlling the output gain of all bands separately.


Changes from the initial version:

• New and more transparent crossover filters
• Haas: Better control for each band
• Split EQ: Now called "PAN" and provides much more control over.
• MS Stereo: New feature in v2.0.0
• Gain: New feature in v2.0.0
• Visualization: New feature in v2.0.0
• Brand new and more intuitive UI for a better work flow.
• Several factory presets.

Full documentation available inside the app or at https://klevgrand.se/downloads/haaze-docs/

Audio examples and more info at https://klevgrand.se/products/haaze

Haaze 2 is an AUv3 plugin that only works in an AUv3 compliant host like Garageband, AUM, Cubasis, Beatmaker 3, Auria etc.

TB Barricade

playlist_add Wishlist

App Store Description:

ToneBoosters Barricade is a studio-quality, professional peak limiter and compressor plug-in with an unrivalled workflow, unlimited creative use and a gorgeous, functional user interface.

The ToneBoosters Barricade app captures the microphone input and processes the signals in real time. To use it as a plug-in, use an AUv3-compatible host app such as Steinberg Cubasis, Apple Garageband, Audio Evolution Mobile Studio, Auria, AUM, or others. ToneBoosters Barricade will appear in the list of Audio Unit extensions for effect plug-ins.

Key features:

- Studio-grade, transparent peak limiting
- The same professional sound as the acclaimed desktop version
- ITU and EBU-compliant true-peak limiting option
- Integrated ITU and EBU compliant loudness meter
- Input modeller for analog circuitry simulation and saturation
- Accurate metering of input and output levels, as well as attenuation
- Simultaneous peak, peak hold, and RMS metering
- Fully automatic, content dependent or manual tuning of limiter behaviour
- Undo/redo, and A/B comparison
- Color themes for the user interface
- Max screen support in Garageband
- Legacy Inter-App Audio (IAA) support
- Optimised for iPad and compatible with iPhone and iPod Touch

Save and export of settings
- The stand-alone app (and IAA app) can load and save settings (locally on iPad, via iCloud, or via iTunes file sharing).
- These files can also be loaded into the desktop version of the plug-in.
- Due to iOS sandboxing restrictions, the AUv3 version can only export settings to be used in the stand-alone app or desktop version but can not share saved settings between AUv3 instances.

What you should know:
- Inter-App Audio (IAA) can only use one instance of this app simultaneously. We recommend to use an AUv3 host to use multiple instances.
- Licenses acquired for this platform are not compatible with other platforms.
- Audio Unit extensions require an iPad mini 2, iPad 4 or later models.

How to use this app as AUv3 plug-in in Apple Garageband for iOS:
https://support.apple.com/kb/PH24861?viewlocale=en_US&locale=th_TH

How to use this app as AUv3 plug-in in Steinberg Cubasis for iOS:
https://www.steinberg.net/fileadmin/files/PRODUCTS/Apps/Cubasis/Cubasis_Help/EF_Rack.html

How to use this app as AUv3 plug-in in Audio Evolution Mobile Studio for iOS:
http://www.audio-evolution.com/manual/doku.php?id=mixer_screen
« Prev Page | 1 ... 35 36 37 38 39 ... 46 |Next Page »

Contact | Privacy Policy | Developer Services | Advertise
discchord.com is a service of Gnubesoft