All {[ category ]}
All {[ device.name ]}
{[ sort['name'] ]}
view_list
   Search

soundfruuze

playlist_add Wishlist

App Store Description:

'soundfruuze' is an exprerimental live sampler / looper / granular and FFT scrub effect

It records live the recent 10 seconds of audio and allows you to manipulate it with special controls.
The interface is divided into five “lanes”, sound is produced by touching the lanes.
Each lane can be set up to use different effect and has various control parameters mapped to the touch position:


Scratch

Most basic lane type. You can control the volume of the resulting sound and smoothness of the position interpolation. Lesser smooth value produces the sound with more high frequencies.

Speed

Another basic playback type. Starts playing from the position in the sound that you selected with touch. Vertical position controls playback speed, horizontal parameter is assignable.


Granular Freeze

Allows you to select the sound at some position and use both horizontal and vertical coordinates of touch as 2 independent parameters. You can control volume, playback speed (pitch) and the grain size.


Granular Scrub

This type of lane is very similar to granular freeze but it allows to change the position of the grain after its start.

Granular Stream

This lane type enables granular playback with random parameters. You can randomise grain position in the selected range, speed, grain size and pan. There is special control for that type lane. The 2-dimensional slider is assignable so you can change 2 parameters for each touch independently.

FFT Freeze and FFT Scrub

In both FFT types of lanes another algorithm is used to process sound. In both FFT Freeze and Scrub sound is analyzed with the FFT transform and divided into frames. FFT Freeze allows you to select the frame at the desired sample position and to play it making the sound “freeze” at this point.


Looper

This lane type allows you to make loops / repeat large grains of sound. When you touch a looper lane, a new looper control is created and is kept there until you turn it off with the red ‘close’ button. You can change loop speed, volume, size and position for each loop individually or for all loops on one lane together using additional controls

FFT Looper

This type works the same way as basic Looper but allows to change playback speed while keeping the pitch. It uses FFT algorithm for playback allowing constant pitch for any playback speed and the same FFT effects (gate and phase randomisation)

Each lane has also five effects:
- Frequency shifter
- Ring modulation
- Sample-and-hold (" lo-fi")
- HP/LP filter
- Reverb

M3000 Ultimate Edition

playlist_add Wishlist

App Store Description:

Robert Fripp, King Crimson, September 2014 : "We no longer take mellotrons on the road. Instead we take this iPad app"

Paul Nagle, Sound On Sound Magazine, February 2014 :
"An easy one to sum up, M3000 is an excellent achievement that ably demonstrates how far the iPad has come in a few short years. I'd take it over the mellotrons in my once-revered Emu Vintage Pro or my Roland JV2080 Vintage board any day. Highly Recommended."

This is a special edition of Mellotronics M3000 50th Anniversary Edition, with every in-app purchase tape included, and with any future tape releases included.

------------------

2013 marked the 50th anniversary of the shipment of the first production mellotron from Streetly Electronics' factory in Birmingham, UK.

To celebrate this historic occasion we are proud to present the 50th Anniversary Edition of Mellotronics M3000, an authentic replication of the legendary M400 tape replay instrument, packed with awesome additional features.

Features :
66 voices in total, 35 chromatic 8 second tapes per voice, almost 1 squigabyte of samples
Samples are original voices from the production tape library of Streetly Electronics*
3 new unlooped voices - MKII Vibes, Rhodes and Piano
3 looping modes - unlooped (maximum authenticity), 5s loops (maximum playability) and 3s loops (very high fidelity, minimum memory footprint)
Looped modes support 4 simultaneous voices - A/B/C continuous blend plus additional D voice on chord pads
32 voicebanks each with 12 programmable chord pads
AudioBus support
Core MIDI support for class-compliant USB interfaces
MIDI responds on all channels to : keys (5 octave response from 3 octaves of samples), pitch wheel, mod wheel (for A/B/C continuous blend), master volume, program change for Voicebank selection. M3000 Tone control may be programmed to any free controller. MIDI notes 1-12 trigger the chord pads.
New synthesis engine with 44.1kHz playback supports mix of looped and unlooped sounds - e.g infinite violins plus decaying piano
Variable 'Tape inching' for authentic factory-style calibration of note attack
Built-in stereoizing reverb engine
Tone control matched to M4000 analog tone
Hypnotic 'Oscillotron' waveform display, in soothing chill-out colour palette
*Caitlin Downie and Clare Lindley collections are 2014 recordings

Full voice list :
M3000 50th Anniversary Edition :

Church Organ
Boys Choir
Female Choir
Eight Choir
String Section
MKII Violins
Cello
MKII Flute
MKII Clarinet
Oboe
Tenor Sax
MKII Brass
Trombone
Piano
Rhodes
MKII Vibes

Streetly Tapes Volume 1 :
Streetly Tapes Volume 2 :
Streetly Tapes Volume 3 :
Harry's Tapes :
Caitlin Downie English Soprano :
Clare Lindley Violin Collection :

Sampletoy

playlist_add Wishlist

App Store Description:

Sampletoy is a radical new musical instrument/plaything; part sampler, part granular synthesiser. Use it to capture sounds through the microphone, then play, loop, pitch and distort them live on the screen.

There are plenty of features under the hood, such as resonant filters, delays and envelope. You can enable "stepped" mode to play your sounds like a traditional keyboard, or keep it in "free" mode for some microtonal madness.

Once you've recorded a sound, use the main area of the screen to play it back at different pitches (up to 5 fingers at a time). You can crop the sound by dragging a selection over the waveform. The crop area is also multitouch and you can adjust the crop while playing the sound too.

The y-axis is pitch of the sound, and the x-axis is configurable to control filters or envelope.

You can record your performances on Sampletoy and send them via email within the app as a CD-quality wav file (mono or stereo)

FEATURES
-------
* Create your own instruments out of any sound.
* Email your performances as audio files straight from the app.
* Built-in resonant filters, delay and envelope.
* Auto-saves current recording and state and recalls it again on next launch.
* Stepped mode allows chromatic, major, minor, pentatonic and whole-tone scales to be played.
* Totally multitouch - play up to 5 notes at once.
* 44kHz/16bit - professional quality sound.
* AudioBus3 output
* Import any audio file to Sampletoy from Files, Voice memos, DropBox etc
* Open non-audio files and hear what they sound like
* Bluetooth / Airplay support
* Built-in comprehensive manual.

Chameleon AUv3 Sampler Plugin

playlist_add Wishlist

App Store Description:

Chameleon is an AUv3 compatible sampler instrument plugin for your favourite DAW.

The program can run as a standalone app in order to record audio samples from the internal microphone or professional audio interface. It also supports incoming Inter-App Audio connections for sampling directly from other iOS applications, however it is primarily intended to be used as an AUv3 Instrument plugin for applications such as Cubasis, AUM, Auria, Meteor, Gargeband etc. The plugin can additionally be loaded as an AUv3 effect in order to record audio passing through it from other AUv3 Instrument sources, which makes it a very versatile and useful tool.

So what is a sampler? A sampler is a device that allows you to imitate other instruments with just a few short audio snippits. Although it comes with a library of presets it also allows you to create your own. You do this by recording multiple audio clips and mapping them to the notes on a MIDI keyboard and Chameleon does the rest using a sophisticated pitch shifting algorithm to fill in the blanks. Recorded samples can either be layered or mapped freely over a 7 octave range and saved as individual presets. Presets are then organised into custom categorised banks which can be exported and shared with others.

Just think, you can sample all your favourite synth sounds and carry them around on your iPhone/iPad without the inconvenience of lugging heavy gear around with you. Sample anything from musical instruments to vocal snippits, drum machines or ambient noises. The possibilities are endless.

Recording is incredible easy. Just create a New Patch and press record. Chameleon will wait for you to play a note before recording begins. Once recorded press the LEARN button and tap the note range on the virtual or MIDI keyboard to map the sample. Repeat this as many times as required, tweak the settings and save your patch. Additionally you can setup loop points with the ability to apply crossfade. If all that sounds too complicated, just press auto sample and let Chameleon do all the sampling for you.

Chameleon also has a quite sophisticated arpeggiator which allows you to create complex mixtures of notes and chords with glide, hold and re-triggering options.

On board reverb, digital delay and chorus effects are available to give your samples a more polished touch. We also include 4 touch pads for quickly dialing in on a sound or for easy effect automation. Configurable touch ADSR and modulation options are available too.

Chameleon can also import audio samples using iOS Files integration or you can make use of Copy / Paste to quickly drop one of more samples into a patch. You can also freely edit samples using the built in tools such as normalise, fade in, fade out, crop, clear options etc.

You can run Cameleon as a standalone app and map external MIDI keyboards (Bluetooth MIDI support also included) and perform audio sampling outside of your DAW. This is provided for convenience since you can't record input when hosted as an AUv3 Instrument plugin.

Yes some DAW's have built in samplers which only have the ability to playback libraries provided with the software. Chameleon allows you to built your own libraries of sounds and share them with others. There's a budding rapper in you dying to get out and we have just the tool!

Features:

AUv3 Instrument and AUv3 Effect compatible
Runs as a standalone app for sampling purposes.
Supports incoming IAA connections to compatible apps..
ADSR touch envelopes and modulation.
ARP - Sophisticated programmable arpegiator.
Reverb, Chorus and Digital Delay Effects with BPM sync.
Backup and Restore patches and banks.
Create your own user banks.
4 Touch Pads for automation.
16 MIDI Drum Pads
iOS Files App support for import and export.
Bluetooth MIDI support
Loop Points and optional Crossfade supported.
Monophonic and Polyphonic modes.
Auto Sample feature.
Built in Vocoder.

sEGments by Elliott Garage

playlist_add Wishlist

App Store Description:

With sEGments slicer/sampler app you can Import any loop/sample/audio file and find the best samples inside it, using the automatic transient detection or manually adding markers.
You can play the slices with any MIDI external controller or with the builtin pads and keyboard layout; also each slice can be played chromatically as in a real synth with mono or polyphonic voices (up to 12).
Each slice has independent parameters (all automatable in any AU host), such as reverse, level, attack, release, start point and length and individual fxs (reverb, delay, bitcrusher and filter) that can be changed on the fly thanks to its flexible audio engine.

sEGments automatically detect BPM and root key of your audio file and it can adjust its tempo and pitch according to your project settings.

It can be used both in standalone or hosted as AudioUnit AU3 inside apps like GarageBand, AUM, BeatMaker3, NanoStudio2, n-Track9 and others, and it supports AU Multi-output.


Features
- Stand-alone, AudioUnit, AudioUnit Multi-output & AudioUnit FX
- Universal app for both your iPad & iPhone
- MIDI in /MIDI out
- AU3 multi-output
- AU3 Fx to record samples from other apps
- import your sample in multiple formats (wav, aiff, mp3, mov, caf, m4a)
- Samples Drag & drop from File App or via airdrop from your Mac or other iOS devices
- Up to 16 slices each one with individual parameters, ADSR and effects (delay, reverb, bit crusher and filter)
- 6 triggering modes - one shot, gate, loop, ping pong, link, thru
- BPM & Key detection
- Record from device mic, usb audio devices or other apps
- Transient detection
- Transient beat division
- Import/export presets
- Open slices directly in EG Pulse
- Support Apple loops transients recognition
- Lazy chopping
- Realtime time stretching and pitch shifting
- Mono & polyphonic up to 12 voices
- Downloadable sample pack by Soundtrack Loops

Please remember that is just the first version of the app, so if you have any feeback, request or suggestion please write at info@elliottgarage.com
« Prev Page | 1 2 3 4 |Next Page »

Contact | Privacy Policy | Developer Services | Advertise
discchord.com is a service of Gnubesoft