All {[ category ]}
All {[ device.name ]}
{[ sort['name'] ]}
view_list
   Search

apeMatrix

playlist_add Wishlist

iTunes Description:

apeMatrix is a unique AU/IAA routing tool that gives you total control over what you want to do and how you want to do it.

Holding true to the standard of apeSoft, apeMatrix continues to push the limits of possibilities in music creation. Automating almost every aspect of linked control, apeMatrix brings all your creation tools together and links them both in MIDI and audio. Letting you inject all your favorite FX both AU and IAA in a very easy and intuitive way. apeMatrix can also assign its Control Manager MIDI, Accelerometer, Scrub and LFO’s to modulate every built-in parameter and any parameter available inside the AUv3 (Audio Unit Plugins).

apeMatrix offers 10 slots on each of the three Matrix grids with 2 bus slots on each grid that make it possible to interconnect all 3 Matrix. The MIDI Patchbay also offers endless possibilities for MIDI routing and control in a similar grid design for both internal and external MIDI control. So you can send and receive MIDI and have ultimate control over where its routed.

Each Audio Connection on the grid has its own gain control. Just tap on the node and drag will give you the full range of volume control. Or use Mixer to controls the RAU output and automate them using apeSoft’s unique Control Manager MIDI, Accelerometer, Scrub and LFO’s to modulate every built-in parameter and any parameter available inside the AUv3 (Audio Unit Plugins).

Turn each slot on or off by a control switch on the Matrix or MIDI control. Control output, pan, mute and solo of each slot and Master output of each Matrix with the built in mixer control or MIDI control.

Route your sounds through all a series of FX or route multiple sounds through the very some FX. The possibilities are as endless as your creativity.


Features include:
3 Matrix Audio
3 MIDI Matrix
10 Open Slots per Matrix (hosts up to 30 plugins)
2 Audio Bus Slots per Matrix
2 MIDI Bus Slots per Matrix
MIDI Monitor
MIDI Scale Filtering, Transpose etc…
Control Manager (MIDI, Accelerometer, LFO, Scrub) for all Built-In Parameters
Control Manager (MIDI, Accelerometer, LFO, Scrub) for all AUv3 (Audio Unit Plugins)
Presets Manager and Morphing Pad
Save Custom AUv3 Presets
Session Saving/Load
Save/Load View’s Frame in Presets
Transport to sends host sync to Audio Unit plugins and IAA
Integrated and configurable MIDI keyboard with scales
Connections output and panning controls
Post Dynamic Processor
Audiobus and Inter-Audio App (Sender and Fx)
Audiobus state saving
Ableton Link
Precise MIDI Clock In/Out
AudioShare Compatible
AudioCopy Compatible
MIDI Manager: Virtual Midi and Network, 14 bit NRPN controllers
File Manager, sharing common audio files via iTunes, Dropbox and AudioCopy etc…
Variable Sampling Rate (up to 96 kHz)
Variable Buffering Size
Variable UI Color Schemes
etc…

MIDI Bagpipes Pro

playlist_add Wishlist

iTunes Description:

“MIDI Bagpipes Pro” is five realistic sounding sets of per-note sampled bagpipes that may be played using standard Scottish piping fingerings on-screen or using a hardware MIDI chanter such as the Fagerstrom Technopipes. The app also may be used as a CoreMIDI sound module.

The app includes the following five sets of Bagpipes:

Great Highland Scottish Bagpipes - The most popular Scottish marching pipes, in the traditional key of Bb.

Scottish Border Pipes - A Scottish smallpipe in the key of A with a sound distinctly different from but similar to the Highland pipes.

Scottish Smallpipes - A Scottish smallpipe in the key of A, one octave lower than the Border Pipes, and has a rounder, bubbly sound.

Irish Uilleann Pipes - A set of bellows driven Irish bagpipes in D. This instrument has a full two octave range when played with a MIDI chanter.

Swedish Säckpipa - A set of Swedish bagpipes in E with a lovely haunting sound.

The instruments may be transposed up to +/- one octave in semitone increments as well as tuned up to +/- 50 cents

IMPORTANT: Since this app requires as many as 8 fingers on the screen at the same time if playing manually by touching the screen, before playing, you must disable "Multitasking Gestures" on your iPad (in the Settings app, under the General section, turn the Multitasking Gestures switch to the off position).

Start/stop the drones playing by touching the drone puck. Select standard or alternate drone note from the controls.

Use the Transpose slider to set the overall instrument transposition in semitones. Touch the transpose value to the left of the slider to reset the transposition to zero.

Use the Tuning slider to set the overall instrument tuning offset in cents. Touch the tuning value to the left of the slider to reset the tuning offset to zero.

Use the Volume controls to set the balance between the chanter and the drones.

Use the Reverb controls to change the reverb type as well as the drone and chanter reverb level.

Use the Drone Channel slider to set the MIDI channel for the drones.

Use the Chanter Channel slider to set the MIDI channel for the chanter notes.

Use the Chanter Lowest MIDI Note slider to set the MIDI note for the bottom note of the chanter. Range is from 55 to 79.

MIDI default parameter values are based on the Fagerstrom Scottish Technopipes:

Drone Channel: 15
Chanter Channel: 1
Chanter Lowest MIDI Note: 67

The drones will start upon receiving any MIDI Note-On event with the note number less than 80 on the drone channel. A MIDI Note-Off event with the same note number that started the drones on the drone channel will stop the drones.

You may enable Chromatic to GHB scale mapping using the Chromatic Map control.

When the Chromatic Map is set to "Off", the app passes the notes directly through with no remapping for chanters that do the GHB fingering mapping in the device.

"GHB-G" is for chromatic chanters where the bottom note is assumed to be the leading G tone.

"GHB-A" is for chromatic chanters where there is no leading tone and the bottom note is the A tone.

If the instrument is set to Uilleann and Chromatic Map GHB-A is enabled, the range will the same as the GHB, i.e. one octave plus the bottom G.

Once set, the MIDI parameters are saved when exiting the app.

To play the chanter manually, touch the bar at the top left with your left thumb. This bar is the hole normally on the back of a real chanter and must be covered for the lower notes to play.

Next, touch the top three holes of the chanter starting with the tips of your left index, middle, and ring fingers.

Finally, touch the bottom four holes of the chanter with the tips of your right index, middle, ring, and little fingers.

Touch the "i" to show/hide the audio and MIDI controls.

Touch the "?" for help.

The Scottish bagpipes samples are supplied by ePipes.co.uk from their "Studio Piper" VST. Säckpipa samples were recorded from an instrument provided by Jonathan Parker.

HarmoGnome

playlist_add Wishlist

iTunes Description:

Harmognome is a metronome for chord progressions. Using a neural-network parametrization of the harmonic system itself, it allows for an efficient, flexible, and practical format for exploring any tonal music.

You should use this application if:

- you play scales to warm up
- you want to improvise over chords
- you want to become functionally aware of intonation

Its binary encoding of harmonic language will allow for sharing of sequences, harmonic MIDI control, and dynamic music.

And of course, you can just enjoy it with your own ears, fingers, and the instrument in your hands.

SynthMaster One

playlist_add Wishlist

iTunes Description:

SynthMaster One iOS is the mobile version of KV331 Audio's SynthMaster One software synthesizer, which was recently voted "The Best New Synth of 2017" by MusicRadar readers.

SynthMaster One iOS is feature wise identical to the desktop version except the following:

* 16 voice polyphony (32 for the desktop version)
* Comes with 500 presets (800 for the desktop version)

SynthMaster One iOS is KV331 Audio's first full blown synth app for the iPad. It's a powerful wavetable synth with an intuitive workflow. With its simple layout, rich wavetable/waveform content and inspiring factory presets library, designing new sounds with SynthMaster One iOS is a joy.

FEATURES

* 500 Factory Presets: SynthMaster One iOS comes with inspiring factory presets from a world class team of sound designers: Arksun, Aiyn Zahev, BigTone Studios, Bluffmunkey, Bulent Biyikoglu, Gercek Dorman, Dejavu Sound, Nori Ubukata, Rob Lee, Ufuk Kevser, Selcuk Ergen, The Machine, Vandalism Sound, Vorpalsound and Xenos Soundworks

* AUv3: SynthMaster One iOS supports AudioUnits V3, allowing multiple instances to run under supporting DAW apps like GarageBand, Cubasis or Beat Maker. It also supports parameter automation and full screen when running inside GarageBand.

* AirDrop: Easily share your presets over AirDrop, Mail or other iOS Applications. SynthMaster One iOS presets are interchangeable with the desktop version.

* Semi-Modular Architecture: For each SynthMaster One instance, there are 2 oscillators with 2 sub oscillators, 2 Filters, 4 ADSR Envelopes, 3 LFOs, a powerful 16 step arpeggiator/sequencer and also 11 different effects that can be inserted on to 6 FX insert slots. The sub oscillators can be connected to the oscillators in 5 different modes which let you use it as a regular sub oscillator or do complex modulations such as ring modulation, amplitude modulation, phase modulation or frequency modulation.

* 16 Step Arpeggiator/Sequencer: The arpeggiator in SynthMaster One features classic arpeggiator modes such as Up, Down, UpDown, DownUp, UpDown2, DownUp2, AsPlayed as well as Sequence, Chord and Arpeggiate modes. Each of the 16 steps of the arpeggiator has its own Velocity, Note Number, Note Length, Slide and Hold parameters.

* Wavetable Synthesis: SynthMaster One implements true wavetable synthesis which opens up new possibilities for sound design. SynthMaster One comes with a rich wavetable library and you can extend that by dragging and dropping wavetable files using the Files App (requires iOS 11+)

* Stereo Oscillators with up to 16 voices Unison: Each of the 2 oscillators in SynthMaster One have stereo output, and can have up to 16 voices "unison". Using the "voices", "voices mix", "detune curve", "detune spread", "pan stread", "tone spread" and "phase spread" parameters, each oscillator can generate a rich "supersaw" type sound.

* Zero Delay Feedback Filters: All of the 4 filter categories in SynthMaster One are developed using the zero delay feedback filter technology. With advanced filter parameters like input gain, drive, acid, filter nonlinearities and up to 4 times oversampling you can get that "analog" sound from the filters!

* Rich Set of Effects: SynthMaster One features 11 different effect types: Distortion, LoFi, Ensemble, Phaser, 6 Band EQ, Compressor, Vocoder, Delay, Chorus, Tremolo, Reverb.

* Microtuning: SynthMaster One supports Scala tuning, so tuning can be set either for each preset or globally by loading from a Scala tuning file.

* Preset Browser: SynthMaster One features a comprehensive preset browser with separate search criterias for instrument type, preset attributes, music style or preset author.

SUPPORTS

* All 64-bit iPad devices
* AUv3 Audio Unit Extensions
* Note-per-channel MIDI controllers (MPE)
* Ableton Link
* Interapp Audio and AudioBus
* Bluetooth LE MIDI Controllers
* Share presets over AirDrop, Mail or other iOS applications

Streemur

playlist_add Wishlist

iTunes Description:

A streaming sound palette for experimental musicians, sound designers and artists.

Includes over 40 preset randomized Internet audio streams.

Add IAA and AUv3 effects to streams in supported DAWs ( Digital Audio Workstations ) such as GarageBand, AUM, Audioshare, Cubasis, and AuriaPro.

Add up to 5 of your own user presets.

*** Note: If using Streemur as an IAA node, be sure to start your IAA host first!
« Prev Page | 1 2 3 4 5 ... 374 |Next Page »